Kaiden
Jun 20, 05:43 PM
Really... I can not believe this is a topic.... LIVE YOUR LIVES for the next 4 days...
MmmPancakes
Sep 23, 03:45 PM
I think the shuffles are a great idea for the tournament, and it shows the school is in tune with cool gifts for that age group. Apple refurbs are usualy great products...especially with a shuffle. With solid state flash memory, its either works perfect or it doesn't work at all, so refurb won't matter too much.
Giuly
Apr 12, 12:26 AM
Get a gigabit switch. They're cheap. As well, many/most currently sold WiFi routers and cable modems/DSL routers have a built-in gigabyte switch.
To use the WiFi printer, the device that is printing does NOT have to connect to the WiFi router via WiFi. It can connect hard-wired. That means if the WiFi router has a gigabyte switch, the connection to other hard-wired devices will be gigabyte (assuming gigabyte capability in the other device.) So the WiFi speed is not an issue, except when printing. And the WiFi speed will be more than sufficient for printing. You'll also be able to print from both machines.
http://img94.imageshack.us/img94/3773/photoiw.jpg (http://img94.imageshack.us/i/photoiw.jpg/)
It's hooked up to my cable modem, the Mini and the router. Both the Mini and the router get external IPs, however the Mini is connected full speed, while you can't get more than 20% of the bandwidth through the router, doesn't matter whether you're connected via Ethernet or WiFi-n to it. I guess the Mini is somehow prioritized by the modem.
And no, I can't connect the router to the modem and the mini to the router - because this is a 110MBit/s DOCSIS3 connection and as stated, the router only has 100MBit/s ethernet ports. I could however connect the router to the Mini via the USB2.0 ethernet adapter intended for the MacBook Air, but I don't really want to dedicate any CPU to that at all.
Darwin: This is exactly what I wanted, and Ethernet was already on top of WiFi. Thanks.
To use the WiFi printer, the device that is printing does NOT have to connect to the WiFi router via WiFi. It can connect hard-wired. That means if the WiFi router has a gigabyte switch, the connection to other hard-wired devices will be gigabyte (assuming gigabyte capability in the other device.) So the WiFi speed is not an issue, except when printing. And the WiFi speed will be more than sufficient for printing. You'll also be able to print from both machines.
http://img94.imageshack.us/img94/3773/photoiw.jpg (http://img94.imageshack.us/i/photoiw.jpg/)
It's hooked up to my cable modem, the Mini and the router. Both the Mini and the router get external IPs, however the Mini is connected full speed, while you can't get more than 20% of the bandwidth through the router, doesn't matter whether you're connected via Ethernet or WiFi-n to it. I guess the Mini is somehow prioritized by the modem.
And no, I can't connect the router to the modem and the mini to the router - because this is a 110MBit/s DOCSIS3 connection and as stated, the router only has 100MBit/s ethernet ports. I could however connect the router to the Mini via the USB2.0 ethernet adapter intended for the MacBook Air, but I don't really want to dedicate any CPU to that at all.
Darwin: This is exactly what I wanted, and Ethernet was already on top of WiFi. Thanks.
toxthexnines
Oct 19, 10:42 AM
I don't know if i am on friday but definately on saturday, i live in bartlesville but im going with a friend to a scion party on saturday so im sure to pick up a copy then.
more...
sebisworld
Jan 7, 12:50 PM
That other useless feature - the shutdown - made the dialog pop up again. Now I can finally turn that vault off :-)
Thank you guys! I will never turn this on again.
Thank you guys! I will never turn this on again.
Osarkon
Apr 6, 01:45 PM
MGS: PO will definitely keep you going, got it yesterday and yikes it's frustatingly hard compared to the old ones and a whole lot more complex. It's easily kept me going 24 hours. :D
more...
JSRockit
Sep 8, 06:55 PM
I hope they are wrong. It is really sad. Apple just keeps falling behind more and more.
maturola
Mar 14, 10:21 AM
As the title says my mother has an original iPad and her iPad is at 3.2.1 or whatever 3.2 or something. Anyways, my question is where can I get the 4.2.1 software for the iPad. If I restore in iTunes right now I will get 4.3. I dont want that. I want 4.2.1! Any way to do that? She is interested in jailbreaking her pad! Thanks in advance...
-Dave
As mentioned on previous post, you need to have your SHSHs saved if you want to installed anything else than the current firmware released by Apple, (currently 4.3). The windows where Apple was signing those SHSHs for 4.2.1 have already been closed (so unless somehow you got your SHSHs saved by tiny Umbrella or Cydia before) your only option is to upgrade to 4.3 or wait out for a Jailbreak tool.
-Dave
As mentioned on previous post, you need to have your SHSHs saved if you want to installed anything else than the current firmware released by Apple, (currently 4.3). The windows where Apple was signing those SHSHs for 4.2.1 have already been closed (so unless somehow you got your SHSHs saved by tiny Umbrella or Cydia before) your only option is to upgrade to 4.3 or wait out for a Jailbreak tool.
more...
ChrisA
Apr 26, 06:19 PM
Hey, I have a few questions regarding recording interface and mics. All I want to be able to record is my guitar and voice at the same time and also separately. This is what I am looking at getting and I was just wondering on your opinions.
If it's an electric guitar and you want to plugit in directly then you are OK. But I'd go for an interface with two phantom powered XLR mic inputs then you can mic a guitar speaker cab or mic an acoustic guitar.
I like the Presonsus "audio box" but any good brand with specs like that will work.
One thing I look for is that the audio interface work on the Mac with no drivers to install. This way you never have to wait and hope that new drivers are available after an OS upgrade. Devices that are "class compliant" don't need drivers, other then those built into Mac OS.
Bottom line is you need to keep your options open on how to record the guitar and for different kinds of guitar like acoustic, acoustic with pickup, electric with direct plug in and a mic'd speaker. Until you've tried you don't know what you will like best. As an example, I'm building a speaker dummy load/simulator that will have an XLR line out. This will (I hope) capture the amp's tone (but not the speaker's tone) without need of a microphone -- it's good to try stuff.
As for a good vocal mic. Looks like you have the right kind, but the brand is a personal preference thing
If it's an electric guitar and you want to plugit in directly then you are OK. But I'd go for an interface with two phantom powered XLR mic inputs then you can mic a guitar speaker cab or mic an acoustic guitar.
I like the Presonsus "audio box" but any good brand with specs like that will work.
One thing I look for is that the audio interface work on the Mac with no drivers to install. This way you never have to wait and hope that new drivers are available after an OS upgrade. Devices that are "class compliant" don't need drivers, other then those built into Mac OS.
Bottom line is you need to keep your options open on how to record the guitar and for different kinds of guitar like acoustic, acoustic with pickup, electric with direct plug in and a mic'd speaker. Until you've tried you don't know what you will like best. As an example, I'm building a speaker dummy load/simulator that will have an XLR line out. This will (I hope) capture the amp's tone (but not the speaker's tone) without need of a microphone -- it's good to try stuff.
As for a good vocal mic. Looks like you have the right kind, but the brand is a personal preference thing
Airforcekid
May 5, 02:14 PM
Depends if you have a decent phone wait youll be glad you did however if you do not have a phone get the 4 and enjoy it for at least another month:p Apple usually supports the phones for 2.5-3 years so the 4 still has plenty of life left.
more...
lee1210
Mar 29, 01:09 PM
gnasher729 gave a great idea that would give you a command you could copy and paste to the terminal to see what's going on. I'll give an additional hint:
the & means something special to the shell. It means "run that command i just gave you in the background". You can quote parameters that might contain such a character, or escape it with \.
-Lee
the & means something special to the shell. It means "run that command i just gave you in the background". You can quote parameters that might contain such a character, or escape it with \.
-Lee
CanadaRAM
Dec 11, 12:37 AM
Hoo boy.
There is no such thing as a Zip or a Jaz drive that comes native with Firewire, or USB 2.0. (theoretically, someone may have put an IDE drive into a Firewire box, but I don't know if the drivers would support that.)
The iomega Zip is a flexible vinyl disk cartridge, and came in two versions, 100 Mb and 250 Mb. Althought the 250 can read and write 100 Mb cartridges it is deadly slow doing so. Zip drives came in Internal and External SCSI-1, external parallel (PC) interface, internal ATA and IDE (the early ATA internals are not Mac compatible) and external USB-1. External Zip drives only have one interface -- Either SCSI OR USB, not both.
The iomega Jaz is a hard-platter disk cartridge and came in two versions, a 1 Gb and a 2 Gb. Most Jaz drives are external, and have a SCSI-2 connector (high density) I have never seen a USB Jaz. Zip and Jaz are completely incompatible with each other.
The SyQuest EZFlyer 3.5" hard-platter cartridge drive (135 Mb and 230 Mb versions) are completely different from the Zip and Jaz, as are the SyQuest 5.25" 44, 88 and 200 Mb drive, the first 3.5" SyQuest (200 Mb?) and the SyJet 1.5 Gb drive - There was one other SyQuest product - Shark? Sharq? 1 Gb - which was only ever released in a PC version as far as I remember.
The imation 120 Mb Superfloppy is incompatible with Zip, it used special 3.5" floppy disks but could also read 1.44 3.5" floppies - most of the time.
The Castlewood Orb drive was a hard disk cartridge drive similar to the Jaz and SyJet which the blank media was never available for, and it died an ignominious death.
There is no such thing as a Zip or a Jaz drive that comes native with Firewire, or USB 2.0. (theoretically, someone may have put an IDE drive into a Firewire box, but I don't know if the drivers would support that.)
The iomega Zip is a flexible vinyl disk cartridge, and came in two versions, 100 Mb and 250 Mb. Althought the 250 can read and write 100 Mb cartridges it is deadly slow doing so. Zip drives came in Internal and External SCSI-1, external parallel (PC) interface, internal ATA and IDE (the early ATA internals are not Mac compatible) and external USB-1. External Zip drives only have one interface -- Either SCSI OR USB, not both.
The iomega Jaz is a hard-platter disk cartridge and came in two versions, a 1 Gb and a 2 Gb. Most Jaz drives are external, and have a SCSI-2 connector (high density) I have never seen a USB Jaz. Zip and Jaz are completely incompatible with each other.
The SyQuest EZFlyer 3.5" hard-platter cartridge drive (135 Mb and 230 Mb versions) are completely different from the Zip and Jaz, as are the SyQuest 5.25" 44, 88 and 200 Mb drive, the first 3.5" SyQuest (200 Mb?) and the SyJet 1.5 Gb drive - There was one other SyQuest product - Shark? Sharq? 1 Gb - which was only ever released in a PC version as far as I remember.
The imation 120 Mb Superfloppy is incompatible with Zip, it used special 3.5" floppy disks but could also read 1.44 3.5" floppies - most of the time.
The Castlewood Orb drive was a hard disk cartridge drive similar to the Jaz and SyJet which the blank media was never available for, and it died an ignominious death.
more...
OnceUGoMac
Jan 21, 12:50 PM
Thanks for the review. When the iPod Shuffle was first announced, my first thought was "I'd never by that." However, I've come to see it as quite useful and it may be a perfect fit for me.
macboy62
Oct 19, 03:10 AM
Im to young for meetups, but does anybody know if :apple: are doing it at shibuya store? acutely...no school GINZA YAY!
maybe
mom might say no
(of-course to meetup but to going in general...maybe)
I think all the stores worldwide are doing the T-shirt thing. Check out Apple Japan site, Google a translation to get it in English.
As for the meet up... bring your mom, some of us are probably the same age or older :D
maybe
mom might say no
(of-course to meetup but to going in general...maybe)
I think all the stores worldwide are doing the T-shirt thing. Check out Apple Japan site, Google a translation to get it in English.
As for the meet up... bring your mom, some of us are probably the same age or older :D
more...
jlwilsonjr
Feb 18, 08:16 AM
Anyone bought the new Bad Company?
Bear
Sep 21, 08:34 AM
I will but if it's just replacement warranty, for the cost, I wouldn't be *too* bothered if it wasn't covered. I'll be backing everything up anyway.
Good point though.
Thanks.Another warranty related point. Seagate offers 5 year warranties, Hitachi offers 3 years. What do the others offer for retail drives?
Some companies (or models of drives) are down to a one year warranty for the retail packaged drive. That tells me they don't expect them to last to 3 years with any decent amount of regularity.
Buy a drive that the manufacturer is willing to give the longer retail warranty. The OEM drives will be the same quality but may have shorter warranties. Also a lot of times you have to go through the correct OEM to get warranty service on an OEM drive.
Good point though.
Thanks.Another warranty related point. Seagate offers 5 year warranties, Hitachi offers 3 years. What do the others offer for retail drives?
Some companies (or models of drives) are down to a one year warranty for the retail packaged drive. That tells me they don't expect them to last to 3 years with any decent amount of regularity.
Buy a drive that the manufacturer is willing to give the longer retail warranty. The OEM drives will be the same quality but may have shorter warranties. Also a lot of times you have to go through the correct OEM to get warranty service on an OEM drive.
more...
Joshuarocks
Apr 2, 08:32 PM
Hello,
.jpg "699.00. Herve Leger Bandage")
699.00. Herve Leger Bandage
Halston Cutout Black Dress
Abstract
Sep 20, 08:07 AM
Worst update EVER. :D
Look closer, dude. I think they added several new Support webpages. SWEET!
Look closer, dude. I think they added several new Support webpages. SWEET!
sineplex
Sep 26, 05:15 PM
How old are some of you people anyway?
I mean, what kind of person goes around wondering whether other people think he has an Iphone or an Ipod touch?
Get a life or grow up, or both!:eek:
They are obviously young people and that's what young people do.
Get a grip man !! don't tell people what they should or shouldn't be doing because it doesn't conform with your world view. . . :rolleyes:
I mean, what kind of person goes around wondering whether other people think he has an Iphone or an Ipod touch?
Get a life or grow up, or both!:eek:
They are obviously young people and that's what young people do.
Get a grip man !! don't tell people what they should or shouldn't be doing because it doesn't conform with your world view. . . :rolleyes:
VideoNewbie
Nov 29, 04:10 AM
Hey i sent you a PM. pls check it when u get a chance thank u
bump
lucidmedia never answered my pm..
any of his/her friends mind giving him a nudge?
i still need more concrete clarification on whether to trademark or copyright the logo for my company...
(ps i am 18 years old so need to make best decision by research done online dont currently have funds to hire a copyright lawyer to make the decision for me)
bump
lucidmedia never answered my pm..
any of his/her friends mind giving him a nudge?
i still need more concrete clarification on whether to trademark or copyright the logo for my company...
(ps i am 18 years old so need to make best decision by research done online dont currently have funds to hire a copyright lawyer to make the decision for me)
RebeccaL
Apr 12, 07:56 AM
Hi,
I need a REALLY cool iphone case. Kinda like the Switch Easy stuff, just a little thinner. Thanks!
Have you looked into the switcheasy Naked? It is a switchasy itself and one of the thinnest cases ever.
Problem is like most plastic cases, it will look like it went through war after just a few weeks of use.
If you don't like that one what switcheasy case you like so I can see If I know of a similar one that is slimmer.
I need a REALLY cool iphone case. Kinda like the Switch Easy stuff, just a little thinner. Thanks!
Have you looked into the switcheasy Naked? It is a switchasy itself and one of the thinnest cases ever.
Problem is like most plastic cases, it will look like it went through war after just a few weeks of use.
If you don't like that one what switcheasy case you like so I can see If I know of a similar one that is slimmer.
NickFalk
Dec 11, 03:41 AM
Hi there a few months back I upgraded my G4 733Mhz Quicksilver with a dual 1,6 Ghz card from Powerlogix. I initialy experienced some problems with the computer turning off on it's own accord after an hour or so of use. After changing the settings in the energy-panel to highest performance this seemed to stop.
Anyway I recently had the brilliant idea (not) of replacing the fan above my harddisk in the vain hope to reduce some noise (which has been the only negative side to my experience with this computer). Everything seemed to work fine initially but suddenly the machine once again started to switch off on it's own account.
I therefore put the original fan back, but the machine still switches off when I push it just a little bit too hard. Nothing fancy really, just a few apps open and running MAME. According to Powerlogix CPU Director was running just south of 109 F when the machine swithched off.
This of course makes me worry more than just a little bit.
My only*real hope is that I have maybe inserted the original fan backwards? Could someone just please tell me whether the sticker on the fan should point outwards into the computer or if it should be pointing away, into the "wall" not being visible.
Thanking you all in advance for your kind help! :)
Anyway I recently had the brilliant idea (not) of replacing the fan above my harddisk in the vain hope to reduce some noise (which has been the only negative side to my experience with this computer). Everything seemed to work fine initially but suddenly the machine once again started to switch off on it's own account.
I therefore put the original fan back, but the machine still switches off when I push it just a little bit too hard. Nothing fancy really, just a few apps open and running MAME. According to Powerlogix CPU Director was running just south of 109 F when the machine swithched off.
This of course makes me worry more than just a little bit.
My only*real hope is that I have maybe inserted the original fan backwards? Could someone just please tell me whether the sticker on the fan should point outwards into the computer or if it should be pointing away, into the "wall" not being visible.
Thanking you all in advance for your kind help! :)
nick1516
Feb 17, 09:19 PM
The only one I have:
Metallica- Orgullo, Pasion, Y Gloria (the 2009 mexico city 2 dvd + 2 cd set)
Metallica- Orgullo, Pasion, Y Gloria (the 2009 mexico city 2 dvd + 2 cd set)
illicium
Mar 13, 10:40 PM
Safari 5.1 on Lion for me is, without exaggeration, 4 times faster loading pages than 5.0.3 on SL. It's insanely fast loading anything from HTML5 to Flash content.
It's not just snappier, it's in a different realm.
It's not just snappier, it's in a different realm.
No comments:
Post a Comment