THX1139
Nov 24, 02:15 PM
The color inconsistency may have to do with your browser and PS not using colorspaces properly.
He probably has color management turned on, and when he loads the images into the browser the colors are different. The solution would be to turn color management off in Photoshop.
Another issue might be that he is using blending modes for his rollovers that get lost when the image is flattened.
He probably has color management turned on, and when he loads the images into the browser the colors are different. The solution would be to turn color management off in Photoshop.
Another issue might be that he is using blending modes for his rollovers that get lost when the image is flattened.
lanulos
Feb 9, 08:16 PM
To use iFile to install a deb, here is how I do it:
Download the .deb to your computer.
Open iFile on your ipod, and click on the WiFi logo on the bottom.
A page of text will display, with a url at the end, something like "http://192.168.xxx.xxx:10000".
Enter the url into the browser on your computer.
A root directory of your ipod will appear in the browser, with an upload box.
Use the upload box to put the .deb somewhere on your ipod, like in /tmp.
In iFile, tap Done and browse to the .deb, and tap it, then tap Installer in the menu. It should then install.
Download the .deb to your computer.
Open iFile on your ipod, and click on the WiFi logo on the bottom.
A page of text will display, with a url at the end, something like "http://192.168.xxx.xxx:10000".
Enter the url into the browser on your computer.
A root directory of your ipod will appear in the browser, with an upload box.
Use the upload box to put the .deb somewhere on your ipod, like in /tmp.
In iFile, tap Done and browse to the .deb, and tap it, then tap Installer in the menu. It should then install.
karl878
May 4, 08:10 PM
(think you meant: com.apple.third_party_32b_kext_keylogger.plist)
See the section headed "Apple Surveying 32-Bit Third-Party Kernel Extensions" at http://blog.slaunchaman.com/
See the section headed "Apple Surveying 32-Bit Third-Party Kernel Extensions" at http://blog.slaunchaman.com/
robshakir
Feb 24, 02:36 PM
Have u had any problems with the slow trackpad that people have been complaining about on the Rev D models?
You might want to check out this:
http://homepage.mac.com/bhines/mousezoom.html
Rob
You might want to check out this:
http://homepage.mac.com/bhines/mousezoom.html
Rob
more...
whiteshadoww
Jun 20, 08:09 PM
Too bad the person stung by the 2 hornets didn't already have his iPhone 4. I'm almost certain that the new iPhone would contain some kind of antidote that would have been very helpful. I guess we will all just have to wait for Thursday!
Is everyone with an iPhone going to download iOS 4 tom and test I out or are you guys going to wait for Thursday?
Is everyone with an iPhone going to download iOS 4 tom and test I out or are you guys going to wait for Thursday?
old-wiz
Feb 12, 10:02 AM
Amazing that a failure sold how many millions since it was launched? And how much money did Apple earn the last quarter? If this is failure, there are lots of companies that need to start producing a failure or two.
more...
macktheknife
Oct 9, 04:30 PM
PS-In a two week trip to Italy last summer, I was delayed by TWO transport labor strikes...according to locals, this happens regularly. You might wonder how they get stuff done if this happens so often. The short answer is that they don't.
A friend told me the same thing happened in France when they were waiting at the Louvre Muesuem. They asked someone working there why the line was so long. The worker responded causally that the workers were deciding on whether to strike. :rolleyes:
This Business 2.0 article talks about how the docks currently operate without even bar-code technology we have in supermarkets:
http://www.business2.com/articles/web/0,1653,44247,FF.html
It's quite ridiculous that the unions are obstructing the implementation of technology. A new scanning system, a better supply chain, and automated cranes might cost a few jobs here and there, but it's an unnecessary inconvenience to many. Should we smash up cars to bring back the jobs of those horse and buggy drivers? :rolleyes:
A friend told me the same thing happened in France when they were waiting at the Louvre Muesuem. They asked someone working there why the line was so long. The worker responded causally that the workers were deciding on whether to strike. :rolleyes:
This Business 2.0 article talks about how the docks currently operate without even bar-code technology we have in supermarkets:
http://www.business2.com/articles/web/0,1653,44247,FF.html
It's quite ridiculous that the unions are obstructing the implementation of technology. A new scanning system, a better supply chain, and automated cranes might cost a few jobs here and there, but it's an unnecessary inconvenience to many. Should we smash up cars to bring back the jobs of those horse and buggy drivers? :rolleyes:
gwuMACaddict
Sep 9, 06:56 AM
yes, i think the gold digger song is pretty lousy...
i think that the performances should try to be mainstream, lets the products speak for themselves, not your over-the-top artists
i think that the performances should try to be mainstream, lets the products speak for themselves, not your over-the-top artists
more...
bella92108
Mar 28, 12:11 PM
Get the latest version of TinyUmbrella. It needs to be updated each time a new firmware is released.
One would think he'd get the idea when it pops up and says "New Version Available, Please UPDATE NOW" whenever it loads. LOL, but alas, never OVERestimate people, hehe
One would think he'd get the idea when it pops up and says "New Version Available, Please UPDATE NOW" whenever it loads. LOL, but alas, never OVERestimate people, hehe
dukebound85
Mar 21, 01:35 PM
Because they are cheaper, more functional, lighter, more secure and easier to distribute information, than a traditional dell laptop most schools would carry
what school hands out individual laptops!
what school hands out individual laptops!
more...
Hackint0sh814
Apr 28, 09:17 AM
Ah beat me to it. My buddy just sent them to me this morning. Glad you got what you were looking for.
skubish
Sep 17, 06:32 PM
My wife and I are going to San Francisco in November. I thinking about taking the BART from SFO to downtown. Mainly I would avoid the hassle of driving downtown plus I would save on rental car costs and parking costs. Once we get downtown we won't really need a car.
How do people feel about BART?
Is it safe and reliable?
How do people feel about BART?
Is it safe and reliable?
more...
dazzer21
Nov 24, 11:06 AM
I'll try to explain this as best I can;
I have a web page produced in Dreamweaver made up of 6 different jpegs.
Along the top is a row of four jpegs, all next to each other which form a menu. They are are set up as rollovers so the text 'glows' when you roll over them.
Under these is a full width jpeg on which is shown an image and some accompanying copy
Under this is a final full width jpeg which acts as a footer - it has a logo on it.
Each of these images has originally been created as a layered Photoshop file. On each of the six files, the bottom layer is the same solid blue. Dreamweaver is set up to have a page background of exactly the same blue so that background colour fills the whole screen.
The problem is, that when these images are converted to jpegs, the background blue is not consistent. On the rollovers, the blue changes further when it's activated. So in essence, you can see where each jpeg finished and the next one ends.
I've tried doing a straight 'save as', and a 'save for web and devices'; nothing seems to work. At the same time, I'm trying to keep the file sizes down as much as possible, but it's just not working out.
Any ideas?
Many thanks.
I have a web page produced in Dreamweaver made up of 6 different jpegs.
Along the top is a row of four jpegs, all next to each other which form a menu. They are are set up as rollovers so the text 'glows' when you roll over them.
Under these is a full width jpeg on which is shown an image and some accompanying copy
Under this is a final full width jpeg which acts as a footer - it has a logo on it.
Each of these images has originally been created as a layered Photoshop file. On each of the six files, the bottom layer is the same solid blue. Dreamweaver is set up to have a page background of exactly the same blue so that background colour fills the whole screen.
The problem is, that when these images are converted to jpegs, the background blue is not consistent. On the rollovers, the blue changes further when it's activated. So in essence, you can see where each jpeg finished and the next one ends.
I've tried doing a straight 'save as', and a 'save for web and devices'; nothing seems to work. At the same time, I'm trying to keep the file sizes down as much as possible, but it's just not working out.
Any ideas?
Many thanks.
twoodcc
Nov 23, 06:31 PM
holy crap you're a genious :) it actually started computing now i think, though it errored out right away with an 'unstable machine' error. first time its gotten that far at least. here's the log
it was trying to use core_15 earlier which was probably the issue. i wasn't forcing it with g80. i'm still not sure from those linux instructions what all we need to do on os x with the wine dll wrapper and stuff though. maybe its not actually seeing the card who knows. thanks for the help:)
looks like it might be an issue with the nvidia cuda driver and 10.6.5? http://forums.nvidia.com/index.php?showtopic=185332
well hey, it seems you are getting somewhere! yeah if you have a core_15, you gotta delete the everything except the fah app and the dll files, and it will download a new core_11.
don't give up! you might be able to get there!
it was trying to use core_15 earlier which was probably the issue. i wasn't forcing it with g80. i'm still not sure from those linux instructions what all we need to do on os x with the wine dll wrapper and stuff though. maybe its not actually seeing the card who knows. thanks for the help:)
looks like it might be an issue with the nvidia cuda driver and 10.6.5? http://forums.nvidia.com/index.php?showtopic=185332
well hey, it seems you are getting somewhere! yeah if you have a core_15, you gotta delete the everything except the fah app and the dll files, and it will download a new core_11.
don't give up! you might be able to get there!
more...
Ladybug
May 5, 07:27 PM
I have a 2011 MacBook pro 15 inch and the iPad 1.... I use the iPad mostly for reading books and listening to podcast, and MBP for everything else. You can't beat the iPad for portable reading. I think you should keep them both. :D
Chris Blount
May 6, 12:14 PM
Yep! Don't rely on the Best Buy web site. I called around and they had the new iMac's in stock and on sale! Just picked mine up.
more...
head honcho 123
Apr 16, 11:11 PM
Hi All,
How do I keep m Mac clean?? I have downloaded a couple of applications that I do not need, how do I delete them??
Thanks,
Will
u can also use Appzapper.
How do I keep m Mac clean?? I have downloaded a couple of applications that I do not need, how do I delete them??
Thanks,
Will
u can also use Appzapper.
jsw
Jan 7, 11:02 AM
I hate FileVault.
I don't think anyone likes it.
I'll try looking into this when I get home.
I don't think anyone likes it.
I'll try looking into this when I get home.
TheMacBookPro
Apr 29, 02:32 AM
XP/Vista/7?
retasi
Dec 22, 04:24 PM
Great stuff.
talmy
Mar 1, 10:00 AM
I've had this happen to me.
Seems to happen only when I've rebooted a system (maybe from sleep state -- see the next paragraph for a possible explanation). I guess it sees some ghost of the old system around (BonJour I expect) and renames itself to avoid conflict.
I've got a Mac mini server handling DHCP/DNS. I know this only happens on a specific system that doesn't have a fixed IP address assigned using the "Static Maps" page in Server Admin. But it might not be the server at fault. I also have an AirPort Extreme that does the Wake-on-LAN for the system. Since it responds to BonJour requests for sleeping systems, if it thinks the system being rebooted is asleep when a new one appears with a different IP address (via DHCP assignment).
If I'm right, you can solve the problem by having the DHCP service assign a fixed IP using the Static Maps.
Now if it is the server itself that is changing names, and it has a static IP, I'm baffled.
Seems to happen only when I've rebooted a system (maybe from sleep state -- see the next paragraph for a possible explanation). I guess it sees some ghost of the old system around (BonJour I expect) and renames itself to avoid conflict.
I've got a Mac mini server handling DHCP/DNS. I know this only happens on a specific system that doesn't have a fixed IP address assigned using the "Static Maps" page in Server Admin. But it might not be the server at fault. I also have an AirPort Extreme that does the Wake-on-LAN for the system. Since it responds to BonJour requests for sleeping systems, if it thinks the system being rebooted is asleep when a new one appears with a different IP address (via DHCP assignment).
If I'm right, you can solve the problem by having the DHCP service assign a fixed IP using the Static Maps.
Now if it is the server itself that is changing names, and it has a static IP, I'm baffled.
paulypants
Mar 11, 02:33 PM
OMG makes perfect sense, thanks for the response Bear!!
macOSX-tastic
Sep 27, 06:38 AM
ah..that may cause a snag....i cant see anything about it in the agreement, but i guess its better to be safe than sorry....plus saving me �90 odd. :D
i guess i shall just have to use that mosterous gray cable.....connected to my beautiful powerbook!!!
tastic
i guess i shall just have to use that mosterous gray cable.....connected to my beautiful powerbook!!!
tastic
jicon
Sep 29, 01:24 PM
http://www.apple.com/support/downloads/macosx1048updateintel.html
No comments:
Post a Comment